Table of Contents
Advertisement
User Manual
SB-CMS-12in1
5.5.5 Application
- Application1
Turn on light when detects movement, and turn it off when no movement after 10s.
a) Enable logic No.1, set IR Sensor - Movement as the condition
b) Logic true delay is 0s, in „trigger target when true‟ window, input dimmer/relay ID, here
is 1-6, parameter 1 is channel 2, parameter 2 is 100.
c) Logic false delay is 10s, in „trigger targets when false‟ window, turn off corresponding
device channel 2.
- Application2
a) When people open the door and come into the meeting room, turn on the lights
automatically:
Set IR Sensor - „Movement‟ and dry contact1(Suppose dry contact 1 has been connected
with a magnetic contact and used to detect the door status) - „Disconnect‟ as input
conditions, and the relation for the logic is „AND‟, turn on dimmer(1-6) channel1 when true.
Multi function Sensor–User Manual
13
Advertisement
Table of Contents
