User Manual
SB-CMS-12in1
5.6 Security function
The states (connected/disconnected) of dry contacts, states (movement/no-movement) of
IR sensor and states (present/absence) of ultrasonic sensor can be set as triggers to
security module.
If use dry contact 1 to detect the door state for security, the setting steps as follow:
a) Select „dry contact 1‟ here, its background will turn blue
b) Select „NEW‟ if the security module firmware version is 2012/07/05 or after, select
„OLD‟ if the security module firmware version is before 2012/07/05.
c) Enable security function
d) Input the security module‟s Subnet/Device ID, totally 8 areas can be selected, here is
area 1.
For further configuration, please turn to security module‟s user manual.
5.7 Relay Settings
There are 2 relay channels in 12in1, and each channel has 2 modes , Normal Mode and
Cycle Mode.
Multi function Sensor–User Manual
16