User Manual
SB-CMS-12in1
5.4.2 Constant Lux function
Using Constant Lux function, the light will dim down if, say the sun comes out of the cloud,
and the light will bright up if the sun hides behind the cloud again, in a word, you can get a
constant brightness(lux).
-Kp
The larger the factor is, the more sensitive it is, but the „ruder‟ output it may produce,
especially when the „control cycle‟ is very short.
- Ki
The smaller the factor is, the more accurate final output it can provide.
5.4.3 Adjust Lux Sensor
It‟s adjusted by HDL, normally not recommended to adjust again unless it‟s quite incorrect.
Password:85521566
5.5 Logic Relation
You can set up to 24 logics and in each logic you can combine up to 9 inputs (conditions),
trigger up to 20 targets when the logic is true and another 20 targets when false.
Multi function Sensor–User Manual
9