Table of Contents
Advertisement
User Manual
SB-CMS-12in1
5.5.1 Logic Information
- Power On Delay（0-120s)
This parameter is specially designed for „Power OFF Recovery‟ (if you select „true‟ in the
„Power OFF Recovery‟, you may get jam on the bus when initializing. you can set „Power
On Delay‟ to avoid this.)
-Same Column
when enabled, you can change the properties of all logics together(„remarks‟, „Enable‟,
„Power OFF Recovery‟)
-Logic No.
up to 24, you can make some remarks
-Enable
You can enable or disable one logic here
-Power OFF Recover
Set the logic status of power on. You can set it as:
No Action：no action when power on;
Power-off status：go back to the status before power off;
True：Set the logic as True when power on;
False：Set the logic as False when power on;
Multi function Sensor–User Manual
10
Advertisement
Table of Contents
