Settings On The Programming Mode; Setting Features - Panasonic KX-TDE200 User Manual

3.1.2 Settings on the Programming Mode

3.1.2 Settings on the Programming Mode
You can programme features using the programming mode.
–

Setting Features

–
Clearing Features
•
To exit at any time, lift the handset.
•
To enter the programming mode when using a PS, refer to "Operating Instructions" for PS.
Setting Features
The default settings are shown in bold letters. For later reference, place a check mark in the boxes below to
indicate your customised setting.
Notice
The default value may vary depending on country/area.
To enter the programming mode
PROGRAM
OR
PAUSE
Press PROGRAM
or PAUSE.
Item
Your extension information
200 User Manual
To programme
programming
OR
input
AUTO DIAL
STORE
Follow
Press ENTER
programming
or STORE.
input.
Programming In-
put
PT: The display shows the PBX or shelf number, slot
number and port number. (Some IP-PTs may not dis-
play the extension number.)
<example for users of KX-TDE100/KX-TDE200>
<example for users of KX-TDE600>
0 0
PS: The display shows the PS number.
<example>
selection &
OR
parameter
AUTO DIAL
STORE
Follow Selection
Press ENTER
& Parameter.
or STORE.
Selection & Parameter
EXT1050:10308
PBX no. Port no.
Slot no.
EXT2100:20101
Shelf no. Port no.
Slot no.
(1 4)
–
EXT3001:99001
PS no.
To exit
PROGRAM
OR
PAUSE
Press PROGRAM
or PAUSE.