Panasonic KX-TDE200 User Manual page 174

1.13.1 Using the Call Log
To clear the log information
Display PT
While confirming the log information
(Call Log)
OR
Press Call Log, or Up or Down
until desired party appears.
To call
Display PT
While confirming the log information
(Call Log)
OR
Press Call Log, or Up or Down
until desired party appears.
To store the caller's information in personal speed dialling
Display PT
While confirming the log information
(Call Log)
OR
Press Call Log, or Up or Down
until desired party appears.
•
The Call Log button light shows the current status as follows:
Off: No incoming call. Or you have already viewed the call log.
Red on: You have missed calls to view.
•
If your call is answered by another extension, the caller's information is recorded on the dis-
plays of both your extension and the answering extension.
•
You can lock your call log display by using an extension PIN (Personal Identification Number),
so that you can prohibit access to your logged information (Display Lock). Refer to "3.1.2 Set-
tings on the Programming Mode".
•
You can also have a Call Log button for an ICD Group (Incoming Call Distribution Group).
•
If a call arrives while you are using the call log, the call log display will be replaced with the
caller's information.
174 User Manual
TRANSFER
Press TRANSFER.
Off-hook.
AUTO DIAL
STORE
Press STORE.