Change Time; Setting The Time - Lathem 1600E User Manual

SETTING THE DISPLAY FORMAT

SETTING THE TIME

It is recommended that during initial installation you manually set the time, date, and time zone.
(See "SETTING THE TIME ZONE" section.) The 1600E will automatically correct itself when
it receives a radio signal from the atomic clock.
Example: Change the time from 10:08 to 10:09.
Second
TIME
SELECT
TIME
SELECT
TIME
SELECT
MO TU
10
Hour Minute
CHANGE SET
CHANGE SET
CHANGE SET
WE TH FR SA SU
S 1
tep
Press the SELECT button and position
the " " mark at the "TIME".
At that moment, the "Hour" flashes. (The
flashing means it can be changed.)
Change the "Hour".
In case of the example, press the SET
button because the hour is not to be
changed.
At that moment, the flashing changes
from "Hour" to "Minute".
S 2
tep
Change the "Minute".
Press the CHANGE button to set at "09",
and then press the SET button.
At that moment, the "Second" starts to
run from "00".
S 3
tep
After you finish setting the time, press
the SET button once again.
Now the time
completed. Replace the cover and lock.
IMPORTANT: If you do not complete
Step 3, the clock will not print.
setting has been