Table of Contents
Advertisement
the modem. You might have to connect the fax/modem to the motherboard Wake On Modem
connector for this feature to work.
Soft-Off by PWRBTN
Under ACPI (Advanced Configuration and Power management Interface) you can create a
software power down. In a software power down, the system can be resumed by Wake up
Alarms. This item lets you install a software power down that is controlled by the power
Button on your system. If the item is set to Instant-Off, then the power button causes a
software power down. If the item is set to Delay 4 Sec, then you have to hold the power
button down for four seconds to cause a software power down.
3-9 PnP/PCI Configuration
IRQ Resources
PCI/VGA Palette Snoop
Assign IRQ For VGA
Assign IRQ For USB
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
Phoenix – AwardBIOS CMOS Setup Utility
Pnp/PCI Configuration
F6:Optimized Defaults
Press Enter
Disabled
Enabled
Enabled
Menu Level >
F7:Standard Defaults
32
Item Help
Advertisement
Table of Contents
