Vision Fitness R2000 Assembly Instruction Manual page 5

Hide thumbs Also See for R2000:

Step 3 • Seat Assembly

1: Secure the Seat Mount Handlebars (110) to the Seat Frame (115) with four

Seat Attachment Bolts (182) and Washers (184).

2: When mounting the Seat Cushion Bottom (136), you have two sets of

holes to choose from. Using the rear set of holes is recommended for

most people. For a smaller person, you may choose to use the forward set

of bolt holes. Mount the Seat Cushion Bottom (136) to the Seat Frame

(115) with four of the Seat Cushion Bolts (195) and Seat Cushion Bolt

Washers (196). Do not fully tighten any bolt until all four bolts are started.

3: Mount the Seat Cushion Back (137) to the Seat Frame (115) using the

remaining four Seat Cushion Bolts (195) and Washers (196). Do not fully

tighten any bolt until all four bolts are started.

R2000

Assembly