About The Usb Controller - Sony CNA-1 Operation Manual

About the USB controller

Use the USB controller that is compliant with the USB HID device class.
The following controller is recommended.
3D Mouse: 3D Connexion SpaceMouse Pro
Up to two USB controllers can be connected to the CNA-1. When connecting two
controllers, use the self-powered USB 2.0 compatible USB hub.
Note
The USB controller other than the recommended controller may not be recognized
even if it is connected to the USB connector.
The operation axis is assigned to the 3D mouse as illustration below in the default
setting.
Moves the frame to the
tilt direction by pressing
back and forward.
3D mouse operation knob
Performs the zoom
operation by turning to
the left and right.
Moves the frame to the
pan direction by pressing
to the left and right.
HD Cutout Control Function Setting 27