Sony CNA-1 Operation Manual page 26

2. Controller
Configuration
7. Assign the function to the buttons on the USB controller
You can assign the function to the USB controller that is connected to the CNA-1 by
using [Button Function Assignment].
Select the button function that is displayed in [Function Select], then click the [Assign]
button. The button changes to the assignment standby status. After the button is in
assignment standby, click the button of the USB controller that you want to assign to
set.
To cancel assigning, click the [Cancel] button.
2. Controller
Configuration
26 HD Cutout Control Function Setting
Controller Select
Default Control Window
Pan/Tilt/Zoom Axis Assignment
Controller Direction
Adjustment
Sensitivity
Acceleration
Clearance
Function Select Switch Cutout Mode Switches the HD Cutout mode
Switch Window
Select Window 1
Select Window 2
Pan Lock
Tilt Lock
Zoom Lock
Select the USB controller that
is used for controlling. When
only a USB controller is
connected, it is selected
automatically.
Select the frame that is
controlled by the selected
controller.
Select the control axis of the
controller that is assigned for
the Pan/Tilt/Zoom operation.
Selects whether to reverse the
direction for the Pan/Tilt/Zoom
movement.
Adjusts the sensitivity of the
controller.
Adjusts the acceleration of the
controller.
Adjusts the inoperable area
near of origin point of the
controller.
of the BPU.
Switches the controlled
window.
Switches the controlled frame
to window 1.
Switches the controlled frame
to window 2.
Locks the frame moving
operation to the pan direction.
Locks the frame moving
operation to the tilt direction.
Locks the zoom operation.