Sony CNA-1 Operation Manual page 16

HD Cutout menu
For details, see "HD Cutout Control
Function Setting" (page 24).
[Apply] button
To display the HD Cutout menu, Click
the [HD Cutout] tab.
To apply the settings, click the [Apply]
button. The settings other than [Cutout
Mode] and [Perspective Parameters]
are stored in the internal memory.
16 Menu operation
[HD Cutout] tab
1. HD Cutout Configuration
Input the IP address of the target
BPU for the HD Cutout control.
Select [Enable] to use the HD
Cutout control function.
Adjust the smoothness of the
movements for the cutout frame.
Sets the HD Cutout parameter.
2. Controller Configuration
Select the controller
Select the cutout
for the setting.
frame that is
controlled by the
selected controller.
Select the function
that is assigned to
the controller's
button.
Start the function
assigning process.
Note
Do not set the HD Cutout control
function to [Enable] when you do not
use the HD Cutout control function.
Adjust the
controller.
Cancel the assigned
function of the
button.