Starting And Stopping The Cna-1; Menu Operation; Menu Operation From A Web Browser - Sony CNA-1 Operation Manual

Starting and
stopping the
CNA-1
The CNA-1 does not have the power
button. When you connect the CNA-1 to
the power supply (CCU or hub that is
compatible with PoE) and start to feed,
the CNA-1 starts.
To stop the CNA-1, turn off the power
supply (that feeds to the CNA-1) or
remove the cable from the CNA-1.
Notes
• Do not stop the CNA-1 while the
ACCESS indicator is flashing.
• The AUX REMOTE connector does
not support power supply from the
CCU.
• When using a power supply other
than PoE, use a hub that is not
compatible with PoE.

Menu operation

Menu operation from a web
browser
The menu for setting up the CNA-1 is
operated on a PC via its web browser.
• Supported OS: Windows 7
• Supported browser: Internet Explorer
8
• Display resolution: 1024 × 768 or
higher
Even though the Web menu can be
displayed by using PCs or browsers
other than above, the screen layout
may not be displayed properly.
To display the menu
1
Connect the CNA-1 and the PC
directly with a LAN cross cable, or
via the hub.
2
Start the web browser and input the
IP address that is set to the CNA-1
after "http://".
For example, http://192.168.1.1
Note
The factory default IP address of
the CNA-1 is set to "192.168.1.1".
3
The menu appears on the web
browser.
Starting and stopping the CNA-1 / Menu operation 11