Advanced Wireless - D-Link DIR-866L User Manual

Section 3 - Configuration
The Advanced Wireless options are for users that want to deviate from the standard settings. Adjusting these values may limit
the performance of your wireless network.
Wireless Band:
Displays the 2.4GHz Band (top) and 5GHz Band (bottom).
Transmit Power:
From the drop-down menu, select the transmit power
for each of the antennas as High, Medium, or Low.
WLAN Partition: This enables 802.11d operation. 802.11d is a wireless
specification developed to allow implementation of
wireless networks in countries that cannot use the 802.11
standard. This feature should only be enabled if you are
in a country that requires it.
WMM Enable: WMM is QoS for your wireless network. This will improve
the quality of video and voice applications for your
wireless clients.
HT 20/40MHz For the 2.4GHz band, you can enable this option to reduce
Coexistence:
interference from other wireless networks in your area.
If the channel width is operating at 40MHz and there
is another wireless network's channel over-lapping and
causing interference, the router will automatically change
to 20MHz when this option is enabled.
Click Save Settings.
D-Link DIR-866L User Manual

Advanced Wireless

90