Section 3 - Configuration
We suggest that you enable wireless security on your wireless router before your wireless network adapters. Establish wireless
connectivity before enabling encryption.
1. Log into the web-based configuration by opening a web browser and
entering the IP address of the router (192.168.0.1). Click on Setup and
then click Wireless Settings on the left side.
2. Next to Security Mode, select WPA-Enterprise.
3. Next to WPA Mode, select Auto(WPA or WPA2), WPA2 Only, or WPA
Only. Use Auto if you have wireless clients using both WPA and WPA2.
4. Next to Cypher Type, select TKIP and AES, TKIP, or AES.
5. Next to Group Key Update Interval, enter the amount of time before the
group key used for broadcast and multicast data is changed (3600 is
default).
6. Next to Authentication Timeout, enter a value (in minutes).
7. Next to RADIUS Server IP Address enter the IP Address of your RADIUS
server.
8. Next to RADIUS Server Port, enter the port you are using with your RADIUS
server. 1812 is the default port.
D-Link DIR-866L User Manual
Configure WPA/WPA2-Enterprise (RADIUS)
46