D-Link DIR-866L User Manual page 74

Section 3 - Configuration
Enable DHCP-PD:
Check this box to enable DHCP prefix delegation.
LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router.
LAN IPv6 Link-Local
Displays the router's LAN IPv6 Link-Local Address.
Address:
Enable Automatic IPv6
Check to enable the IPv6 Autoconfiguration.
address assignment:
Enable Automatic DHCP- Check to enable delegation of prefixes for router addresses.
PD in LAN:
Select SLAAC + RDNSS or SLAAC + Stateless DHCPv6, or
Autoconfiguration Type:
Stateful DHCPv6.
IPv6 Address Range Start: Enter the start IPv6 Address for the DHCPv6 range for your
local computers.
IPv6 Address Range End: Enter the end IPv6 Address for the DHCPv6 range for your
local computers.
Enter the Router Advertisement Lifetime (in minutes).
Router Advertisement
Lifetime:
Click Save Settings.
D-Link DIR-866L User Manual 69