Network Settings; Router Settings - D-Link DIR-866L User Manual

Section 3 - Configuration
From this screen, you can change the local network settings of the router and configure DHCP settings. If you have devices on
your network that must have a fixed IP address, you can create a DHCP reservation. Refer to
Enter the IP Address of the DIR-866L. The default IP address
Router IP Address:
is 192.168.0.1.
If you change the IP address here, once you click Save Settings,
you must enter the new IP address in your browser to get back
into the router's configuration utility.
Subnet Mask: Enter the Subnet Mask. The default subnet mask is
255.255.255.0.
Device Name: Enter a name for the router.
Local Domain Enter the Domain Name (Optional).
Name:
Enable DNS Relay: If you leave the box checked, your computers will use the
router's built-in DNS server. Uncheck the box to transfer the
DNS server information from your ISP to your computers.
Click Save Settings.
D-Link DIR-866L User Manual

Network Settings

Router Settings

"DHCP Reservation" on page 51.
48