Advanced Network Settings - D-Link DIR-866L User Manual

Section 3 - Configuration
Enable UPnP: Check the box to enable the Universal Plug and Play
(UPnP ) feature. UPnP provides compatibility with
™
networking equipment, software and peripherals.
Enable WAN Ping Checking this box will allow the DIR-866L to respond
Respond
to pings. Unchecking the box may provide some extra
security from hackers, since malicious Internet users often
use pings to locate active networks or PCs.
WAN Ping
Select an option from the drop-down menu if you would
Inbound filter: like to apply an Inbound filter to the WAN ping.
Details: Displays the details for the WAN Ping Inbound Filter
WAN Port Speed: You may set the port speed of the Internet port to 10Mbps,
100Mbps, 1000Mbps or Auto 10/100/1000Mbps
(recommended).
Enable IPv4 Check the box to allow multicast traffic to pass through
Multicast
the router from the Internet (IPv4).
Streams:
Enable IPV6 Check the box to allow multicast traffic to pass through
Multicast
the router from the Internet (IPv6).
Streams:
Click Save Settings.
D-Link DIR-866L User Manual

Advanced Network Settings

93