Table of Contents
Advertisement
Section 4 - Security
Configure WPA/WPA2-Enterprise (RADIUS)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before
enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1. Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1).
2. Click on Setup and then click Wireless Settings on the left side.
3. Click the Manual Wireless Connection Setup button.
4. Next to Security Mode, select WPA- Enterprise.
5. Next to WPA mode, select Auto (WPA or WPA2), WPA2 only or WPA only.
6. Next to Cipher Type, select (TKIP/AES), TKIP, or AES.
7. Next to RADIUS Server IP Address enter the IP Address of your RADIUS server.
8. Next to Port, enter the port you are using with your RADIUS server. 1812 is the
default port.
9. Next to Shared Secret, enter the security key.
10. Click Save Settings to save your settings.
D-Link DHP-1565 User Manual
140
Hide quick links:
Advertisement
Table of Contents
