Configure Wpa/Wpa2-Enterprise (Radius) - D-Link AC750 User Manual

Section 3 - Configuration
It is recommended that you enable wireless security on your wireless router before your wireless network adapters. Please
establish wireless connectivity before enabling encryption.
1. Log into the web-based configuration by opening a web browser
and entering the IP address of the router (192.168.0.1). Click on
Setup and then click Wireless Settings on the left side.
2. Next to Security Mode, select WPA-Enterprise.
3. Next to WPA Mode, select Auto(WPA or WPA2), WPA2 Only, or
WPA Only. Use Auto if you have wireless clients using both WPA
and WPA2.
4. Next to Cypher Type, select TKIP and AES, TKIP, or AES.
5. Next to Group Key Update Interval, enter the amount of time before
the group key used for broadcast and multicast data is changed
(3600 is default).
6. Next to RADIUS Server IP Address enter the IP Address of your
RADIUS server.
7. Next to RADIUS Server Port, enter the port you are using with your RADIUS server. 1812 is the default port.
D-Link DIR-818LW User Manual

Configure WPA/WPA2-Enterprise (RADIUS)

46