Fresh Food Evaporator Assembly - Electrolux Built-in 42" Service Manual

Fresh Food Evaporator Assembly

The fresh food evaporator assembly consists of an
evaporator, defrost and drain heaters, bimetal defrost
safety thermostat, thermistor, and evaporator fan
assembly.
All components are housed together and installed in the
refrigerator interior in a recessed compartmet in the
refrigerator ceiling. This compartment extends vertically
into the machine compartment.
To access the fresh food evaporator assembly:
1. Remove the fresh food grille cover by inserting a fl at-
blade screwdriver into the slot (see photo) and lifting
up.
2. Remove 4 Phillips-head screws from the fresh food air
duct cover. Pull the front of the cover down.
3. Disconnect the thermistor and lighting connector.
Remove the fresh food air duct cover.
4. Remove the 4 Phillips-head screws that hold the
5995432258
refrigerator suction line drain assembly in place.
Remove the assembly.
5. Remove the 2 Phillips-head screws that hold the fresh
food upper duct cover assembly in place. Remove the
upper duct cover.
6. Disconnect the remaining electrical connectors.
7. Remove 2 Phillips-head screws from the fresh food
evaporator housing.
8. Lower the evaporator assembly into the fresh food
compartment.
50