Freezer Evaporator - Electrolux Built-in 42" Service Manual

freezer evaporator assembly housing in place.
12. Lower the evaporator assembly into the freezer
compartment.
13. Place the freezer shelf in the top position. Place the
evaporator assembly on the shelf.
Caution: Refrigerant lines may be damaged if the
evaporator assembly is left unsupported.
Freezer Evaporator Fan Assembly
The freezer evaporator fan assembly consists of a 2-speed
DC fan motor, blower wheel, and housing. It is mounted
on top of the evaporator.
To remove the freezer evaporator fan assembly:
1. Access the freezer evaporator assembly. (See Freezer
Evaporator Assembly.)
2. To access the fan assembly screws, support the
evaporator assembly from the machine compartment
grille mounting bracket with a bent wire hook (see
photo).
3. Remove the 4 Phillips-head screws that hold the
evaporator fan assembly in place. Remove the
evaporator fan assembly. Evaporator Assembly
5995432258
Note: When installing the fan assembly, ensure that the
housing lip inserts into the channel.

Freezer Evaporator

To access the freezer evaporator:
1. Access the freezer evaporator assembly. (See Freezer
Evaporator Assembly.)
2. Remove the freezer evaporator fan assembly. (See
Freezer Evaporator Fan Assembly.)
3. Place the freezer shelf in the top position. Place the
evaporator assembly on the
shelf. (Note the position of all wiring prior to
48