(Video signal connections)
: Y/C or S-VIDEO IN
: Y/C or S-VIDEO OUT
Connections to the camera Y/C OUT connector
The peripheral devices (VCR, monitor, lens, etc.) and
cables are sold separately.
Using a coaxial cable (twin type, 75 ohms), connect the
Y/C OUT connector from the camera to the S-VIDEO
input terminal on the monitor or time lapse VCR.
Insert the plug of this power cord into a wall outlet.
Then, turn on the power of all the devices connected to
The POWER indicator (A) will light. Adjust the picture on
the monitor using the Brightness and Contrast controls.
• Please use a monitor with a Y/C or S-VIDEO input
terminal, or a time lapse VCR with a S-VIDEO input
• Use a Mini-DIN (round type, 4-pin) plug to connect to the
Never use a coaxial cable longer that 10 metres to
connect the camera to the S-VIDEO input terminal.