Fuse Test
To do a fuse test:
1.
Set the function switch to .
2.
Connect a test lead to the jack as shown in
Figure 10.
3.
Touch the other end of the test lead to the mA jack.
A good fuse will show a resistance of 12 Ω or less.
Replace the fuse if the resistance is higher or OL is
shown.
Quality Fluke Products Online at:
GlobalTestSupply
www.
.com
Wireless Multimeter
440 mA
<12
Figure 10. Fuse Test
sales@GlobalTestSupply.com
Fuse Test
OK
OK
gxr009.eps
31