CNX 3000
Users Manual
A Warning identifies conditions and procedures that are
dangerous to the user. A Caution identifies conditions
and procedures that can cause damage to the Product or
the equipment under test.
A list of symbols used on the Product and in this manual
is in Table 1.
Warning
To prevent possible electrical shock, fire, or
personal injury:
•
Carefully read all instructions.
•
Use the Product only as specified, or the
protection supplied by the Product can
be compromised.
•
Limit operation to the specified
measurement category, voltage, or
amperage ratings.
•
Do not use the Product around explosive
gas, vapor, or in damp or wet
environments.
•
Do not touch voltages > 30 V ac rms,
42 V ac peak, or 60 V dc.
•
Do not exceed the Measurement
Category (CAT) rating of the lowest rated
individual component of a Product,
probe, or accessory.
2
Quality Fluke Products Online at:
•
Measure a known voltage first to make
sure that the Product operates correctly.
•
Do not use, and disable the Product if it
is damaged.
•
Do not work alone.
•
Comply with local and national safety
codes. Use personal protective
equipment (approved rubber gloves, face
protection, and flame-resistant clothes)
to prevent shock and arc blast injury
where hazardous live conductors are
exposed.
•
Replace the batteries when the low
battery indicator shows to prevent
incorrect measurements.
•
The battery door must be closed and
locked before you operate the Product.
GlobalTestSupply
www.
.com
sales@GlobalTestSupply.com