Table of Contents
Advertisement
RouterBOARD 1100
User's Manual
Copyright and Warranty Information
Copyright and Trademarks. Copyright MikroTikls SIA. This manual contains information protected by copyright
law. No part of it may be reproduced or transmitted in any form without prior written permission from the
copyright holder. RouterBOARD, RouterOS, RouterBOOT and MikroTik are trademarks of MikroTikls SIA. All
trademarks and registered trademarks appearing in this manual are the property of their respective holders.
Hardware. MikroTik warrants all RouterBOARD series equipment for the term of fifteen (15) months from the
shipping date to be free of defects in materials and workmanship under normal use and service, except in case
of damage caused by mechanical, electrical or other accidental or intended damages caused by improper use
or due to wind, rain, fire or other acts of nature.
To return failed units to MikroTik, you must perform the following RMA (Return Merchandise Authorization)
procedure. Follow the instructions below to save time, efforts, avoid costs, and improve the speed of the RMA
process.
1. If you have purchased your product from a MikroTik Reseller, please contact the Reseller company
regarding all warranty and repair issues, the following instructions apply ONLY if you purchased your
equipment directly from MikroTik in Latvia.
2. We do not offer repairs for products that are not covered by warranty. Exceptions can be made for
RB1000 and RB1100.
3. Out-of-warranty devices and devices not covered by warranty sent to Mikrotikls will be returned to
the sender at sender's cost.
RMA Instructions are located on our webpage here: http://rma.mikrotik.com
Manual. This manual is provided "as is" without a warranty of any kind, expressed or implied, including, but
not limited to, the implied warranty of merchantability and fitness for a particular purpose. The manufacturer
has made every effort to ensure the accuracy of the contents of this manual; however, it is possible that it may
contain technical inaccuracies, typographical or other errors. No liability is assumed for any inaccuracy found
in this publication, nor for direct or indirect, incidental, consequential or other damages that may result from
such an inaccuracy, including, but not limited to, loss of data or profits. Please report any inaccuracies found to
support@mikrotik.com
Advertisement
Table of Contents
Related Manuals for MikroTik RouterBOARD 1100
Summary of Contents for MikroTik RouterBOARD 1100
-
Page 1: User's Manual
Hardware. MikroTik warrants all RouterBOARD series equipment for the term of fifteen (15) months from the shipping date to be free of defects in materials and workmanship under normal use and service, except in case of damage caused by mechanical, electrical or other accidental or intended damages caused by improper use or due to wind, rain, fire or other acts of nature. -
Page 2: Table Of Contents
USER'S MANUAL ................................1 COPYRIGHT AND WARRANTY INFORMATION ........................1 SYSTEM BOARD VIEW AND LAYOUT ..........................3 SPECIFICATIONS ................................4 HARDWARE GUIDE ................................4 ..............................4 EMORY AND TORAGE EVICES ................................5 NPUT UTPUT ORTS ...................................... 5 USER'S GUIDE ................................... 5 .............................. -
Page 3: System Board View And Layout
RouterBOARD 1100/AH Series User's Manual System Board View and Layout You can download the board dimensions and case design files (PDF and DXF) from www.routerboard.com... -
Page 4: Specifications
Specifications RouterBOARD 1100/AH RB1100: MPC8544 800MHz RB1100AH: P2010 1066MHz RB1100AHx2: P2020 1066MHz dual core CPU with IPsec acceleration Memory SODIMM slot, no onboard module Boot loader RouterBOOT Data storage onboard NAND memory chip Ethernet Thirteen 10/100/1000 Mbit/s Ethernet ports supporting Auto-MDI/X... -
Page 5: Input/Output Ports
RouterBOARD 1100/AH Series User's Manual Input/Output Ports Ethernet ports There are thirteen ethernet ports. There are two switch groups, five ports each. The Ether13 port supports Power over Ethernet. The RB1100 device also has two Ethernet bypass ports (Ether11 and Ether12). The bypass mode can be activated by turning the bypass switch next to them to the position 1. -
Page 6: Powering
Booting from network Network boot works similarly to PXE or EtherBoot protocol, and allows you to boot a RouterBOARD 1100 series boards from an executable image stored on a TFTP server. It uses BOOTP or DHCP (configurable in boot... -
Page 7: Routerboot
RouterBOARD 1100/AH Series User's Manual Operating System Support MikroTik RouterOS, starting from version v5, is fully compatible with RouterBOARD 1100 series embedded boards. If your device is preinstalled with an earlier RouterOS release, please upgrade RouterOS to v4.9 or newer. -
Page 8: Boot Loader Upgrading
The boot loader upgrading is possible from MikroTik RouterOS, from within the “/system routerboard” menu. Updates are included with each RouterOS update. The procedure is described in the MikroTik RouterOS manual: http://wiki.mikrotik.com/wiki/Manual:Bootloader_upgrade... -
Page 9: Primary Boot Loader
RouterBOARD 1100/AH Series User's Manual Primary Boot Loader There are two boot loaders present on the NOR flash memory chip. Secondary is the main one, that is executed by default. This is the one that can be upgraded. In case something goes wrong in the upgrade process, or you have set some incorrect settings that render it unusable, you can load the Primary boot loader by holding the Software Reset 1 button (S1), connecting the power, and then releasing the button/jumper. -
Page 10: Software Reset
The Software Reset 2 button (TP12) reset hole, which resets both boot loader settings and RouterOS setting by default, can be disabled in this menu (it will still reset the boot loader settings). Software Reset It is possible to reset all software configuration by using the Software Reset 2 button hole (C229, see schematic) during the power-up. -
Page 11: Button Index
RouterBOARD 1100/AH Series User's Manual Button Index S401 Software Reset 1 button. Loads the Primary boot loader S402 Software Reset 2 button hole. Resets RouterOS settings Ethernet Cables RJ45 Color Function Function RJ45 pin for Straight cable RJ45 pin for Crossover cable...