Installation With A Router - D-Link DG-102S Quick Start Manual

Installation with a Router

high speed
internet modem
existing
cable or phone
line
To begin installation, turn off your computer and disconnect the power adapters to your high speed modem and router.
step
Connect an Ethernet cable from the high speed modem to the

step
Connect an Ethernet cable from the
2
step
Connect the Ethernet cable from the
3
to the available
step
Connect your telephone to the
4
step Connect the high speed modem to the power outlet.
5
Note: Please wait 2 minutes before continuing to the next step.
step
Connect the router to the power outlet.
6
Note: Please wait 2 minutes before continuing to the next step.
step
Connect the iPhone to the power outlet.
7
The iPhone Status light will blink until it has successfully connected to the Comwave network.
Once the status light becomes solid green, the iPhone is ready for use.
The iPhone Status light will blink until it has successfully connected to the Comwave network.
Once the status light remains lit, the iPhone is ready for use.
Page 6
router
step

step step
5 6
step
7
power outlet
LAN
LAN
LAN port on the iPhone.
Line 1 of the iPhone.
step
2
WAN
port of the router to the WAN
port of the router to the PC. The PC can also be connected
step
3
step
4
port of the router.
port of the iPhone.
PC
telephone