Hatz 2-4L30 Workshop Manual page 5

Introduction
This workshop manual is in accordance with the technical status shown on each page
(month / year). It has been compiled in such a way that a trained mechanic can perform
all repair work correctly. Instructions such as „Clean parts" etc. have been omitted, as
they are assumed to be self-evident.
All work must be carried out only with the specified tools or with others of absolutely
equivalent quality.
It is assumed that the normal hand tools will be available, even if not called for specifi-
cally in this manual.
Please refer to the operating manual for details of routine maintenance work, operating
fluids and materials, troubleshooting etc.
Use only genuine HATZ spare parts in repair work.
Comply also with generally or locally valid legislation and with the instructions issued by
trade associations or accident insurers.
The details provided here may differ if special equipment is installed. Please appreciate
that neither the workshop manual nor the spare parts list can take all such deviations
into account. If problems occur, please contact the nearest HATZ service point.