Installing The Aileron Linkages - Pheonix Model SBACH Instruction Manual

Instruction Manual
3. Repeat step # 1 - # 2 to install the second
control horn on the aileron.
↑
To the cowl
4. Repeat step # 1 - # 3 to install the control horn
for the second aileron.

INSTALLING THE AILERON LINKAGES

1. The aileron linkages are assembled as shown
below.
22mm
95mm
22mm
95mm
9
7
10
↑
To the cowl
11
7
22mm
22mm
2. Install the link ball to the control horn.
M3 nut
Screw
Flat washer
Aluminum link ball
Plastic link ball
Servo arm
Flat washer
M3 nut
3. Repeat step 1 - step 3 for the second aileron
linkage.
INSTALLING THE WING TO THE FUSELAGE
Attach the wings to the joiner tube and using the
nylon thumbscrews to secure the wing panels to
the fuselage.
4
SBACH
12
13