Assembling The Recoil Starter - Yamaha EK25BMH Service Manual

POWR
RECOIL STARTER
8. Check:
• Drive pawl
Cracks/damage/wear → Replace.
• Return spring
• Friction spring
Bent/broken/damage → Replace.

ASSEMBLING THE RECOIL STARTER

CAUTION:
New spiral springs come held in a steel
hoop. To install, hook the outer end onto
the spring pin first, place into the starter
case, and then remove the steel hoop.
1. Install:
• Starter case
• Thrust washer
• Spiral spring
NOTE:
Hook the outer end
onto the spring pin attached to the starter
case, and put the spring into the starter
case by winding it counterclockwise.
WARNING
When removing or installing the spiral
spring, use care not to injure your hand. It
is advisable to wear gloves.
5-6
1
2
3
1
2
3
4
of the spiral spring
E