CHK
GENERAL
ADJ
5. Tighten:
•
Spark plug
Spark plug
25 N
•
NOTE:
• Before installing the spark plug, clean
the gasket surface and spark plug sur-
face. Also, it it suggested to apply a
thin film of anti-seize compound to the
spark plug threads to prevent thread
seizure.
• If a torque wrench is not available, a
good estimate of the correct tightening
torque is to finger tighten
plug and then tighten it another 1/4 to
1/2 of a turn
CHECKING THE PROPELLER
Check:
•
Propeller
•
Spline
Wear/cracks/damage → Replace.
CHECKING BOLTS AND NUTS
Check:
•
Power unit mount bolt
•
Flywheel nut
Loose bolts / nuts → Tighten to the
specified torque.
Power unit mount bolt
1st 11 N
2nd 22 N
Flywheel nut
140 N
3-23
m (2.5kgf
m, 18 ft
lb)
•
•
a
b
.
m (1.1 kgf
m, 8.1 ft
•
•
m (2.2 kgf
m, 16 ft
•
•
m (14 kgf
m, 103 ft
•
•
E
the spark
lb)
•
lb)
•
lb)
•