Yamaha EK25BMH Service Manual page 46

CHK
CONTROL SYSTEM
ADJ
6
(6) If they are not in contact, loosen the set
bolt
contact with each other, and secure the
bolt again.
3. Adjusting the carburetor control link:
• Accelerator cam
• Carburetor control link
Adjustment steps
(1) Set the shift lever
tion.
(2) Move the throttle
tion.
(3) Make sure that the magnet base stopper
3
3
is in contact with the stopper on the
engine body (full-open end stopper)
4
(4) Check to see that the full-open marking
"C" on the accelerator cam aligns with
the center of the cam roller.
3-7
6
, adjust until they are correctly in
1
in forward posi-
2
to full-open posi-
E
4
.