Configuring Custom Settings; Programmable Keys - Avaya 1140E User Manual

Configuring custom settings

Configuring custom settings
You can use the following additional features:
• "Programmable keys" on page 210
• "Assigning features to programmable keys" on page 212
• "Erasing a programmable key" on page 213
• "Restoring the default settings for programmable keys" on page 214
• "Configuring speed dial keys" on page 215
• "Querying programmable keys" on page 216
• "Using the relay option" on page 217
• "Twinning" on page 220
• "Configuring Privacy settings" on page 221
• "Audio Codecs" on page 223
• "Automatic remote firmware updates" on page 225
• "Screensaver/screen lock" on page 225
• "Background image" on page 230
• "USB flash memory device support" on page 230

Programmable keys

You can configure the programmable keys on the IP Deskphone or on a
Key Expansion Module (KEM) to activate specific features. When you
configure a programmable key, it acts as a short cut so that you do not
need to enter a feature codes in order to activate the feature.
If a feature is programmed on a button, the status of the button will be
updated with an active/idle state, depending of the status of that feature.
This is supported by the following features:
• Call Forward All
• Twinning
210