Hangar 9 Tango 40 ARF Assembly Manual page 18

Section 3B: Electric Motor Installation

Step 4
Solder the appropriate connectors onto the speed control.

Step 5
Secure the speed control to the plywood battery tray
as shown. Make sure it will not move when installed
in the fuselage.
18

Step 6
Slide the plywood battery tray into the fuselage. Secure
the tray using a 4-40 x 1/2-inch socket head screw and
#4 washer.

Step 7
Connect the leads from the motor to the speed control.
Secure the wires so they will not interfere with the
operation of the motor.