Makita HR3000C Instruction Manual page 20

MAKnA LIMED O N E YEAR WARRANTY
Warranty Policy
Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to
be free of defects from workmanship and materials for the period of ONE YEAR from the date of
original purchase. Should any trouble develop during this one-year period, return the COMPLETE
tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. If inspection shows
the trouble is caused by defective workmanship or material, Makita will repair (or at our option,
replace) without charge.
This Warranty does not apply where:
repairs have been made or attempted by others:
repairs are required because of normal wear and tear:
The tool has been abused, misused or improperly maintained;
alterations have been made to the tool
I N NO FVFNT SHALL MAKITA Bb LlABLt kOR ANY INDIRTCT, INCIDkNTAL OK
COY-
SLOUFNTIAL DAMAGI-S FROM THL SALE OR USt 01 THt PRODUCT THIS DISCLAIMER
APiLlES BOTH DURING AND AFTER THE TERM O F THIS WARRANTY.
MAKITA DISCLAIMS LIABILITY FOR ANY lMPLlED WARRANTIES, INCLUDING IMPLIED
WARRANTIES OF "MERCHANTABILITY" AND "FITNESS FOR A SPECIFIC PURPOSE,
AFTER THE ONE-YEAR TERM OF THIS WARRANTY.
This Warranty gives you specific legal rights, and you may also have other rights which vary from
state to state. Some states do not allow the exclusion or Limitation of incidental or consequential
damages,
so
the above limitation or exclusion may not apply to you. Some states do not allow
limitation on how long an implied warranty lasts,
so
the above limitation may not apply to you.
Makita Corporation
3-11 -8,
Sumiyoshi-cho,
Anjo, Aichi
446-8502
Japan
884253- 069 PRINTED
IN
JAPAN
2000
- 2 -
N