Makita HR3000C Instruction Manual page 13

Drilling in
wood
or
metal
Use the optional drill chuck assembly (con-
sisting of drill chuck and chuck adapter
assembly). When installing it, refer to
"installing or removing drill bit" described
on the previous page. Set the action mode
changing knob to "rotation only". You can
drill up to 13 mm (1/2") diameter in metal
and
up to
30 mm (1-3/16") diameter in
wood.
CAUTION:
Never use "rotation with hammering" when the drill chuck assembly is installed on the
tool. The drill chuck assembly may be damaged. Also, the drill chuck will come off when
reversing the tool.
13