Using Additional Handsets; Registering An Additional Handset - BT Synergy 5100 User Manual

Using additional handsets

48
Default PIN code = 0000
If registration is not successful first time,
please repeat the process again incase the base
registration period ran out of time.
If there are already 5 handsets registered to
the base, the registration will fail. You must de-
register another handset before you can register
the new one.
If you experience any problems, please call the Helpline on 0800 145 6789* or email bt.helpdesk@sgweurope.com
You can use up to five BT Synergy additional handsets with your BT Synergy
5100 base to extend your phone system without needing to install extension
sockets for each new phone.
Your BT Synergy 5100 handset can also be registered to up to 3 other bases.
You can then select the base you would prefer to use.
If you have purchased a BT Synergy 5100 multiple pack any additional
handsets come pre-registered to the base.
If you have purchased an additional handset separately you must register it to
your BT Synergy 5100 base before it can be used.

Registering an additional handset

At the base:
1. Press and hold for 3 seconds until the base Power / In use starts flashing.
You have up to 60 seconds to register the handset.
At the handset:
1. If the handset is new and the display shows Please register. Press menU.
The display shows registration. Press select.
Or
If the handset has already been registered to another base the standby
display is shown. Press menU, scroll
and press select.
2. register HanDset is highlighted. Press select.
3. Bases are displayed. If necessary, scroll
to register your BT Synergy 5100 handset to and press select.
4. Enter the system PIN and press ok.
5. The display shows searcHing Base x (where X is the chosen base number)
then HanDset registereD.
The handset is automatically assigned the next available handset number.
or to registration
or to a new base you wish