General Information; Atv Identification Numbers; Ignition Switch Key; Control Locations And Functions - Arctic Cat XR 500 Operator's Manual

General Information

ATV Identification
Numbers
The Arctic Cat ATV has two identifica-
tion numbers: Vehicle Identification
Number (VIN) and Engine Serial Num-
ber (ESN).
The VIN is located on the frame support
rail.
The ESN is located on the left-side rear
of the engine crankcase.
These numbers are required by the dealer
to complete warranty claims properly. No
warranty will be allowed by Arctic Cat if
the VIN or ESN is removed or mutilated
in any way.
Always provide the ATV name, Vehicle
Identification Number, and Engine Serial
Number when contacting an authorized Arc-
tic Cat ATV dealer for parts, service, accesso-
ries, or warranty. If a complete engine must
be replaced, ask the dealer to notify Arctic
Cat for correct registration information.

Ignition Switch Key

Two keys come with the ATV. Keep the
spare key in a safe place. An identifying
number is stamped on each key. Use this
number when ordering a replacement key.
Control Locations and
Functions
Ignition Switch
The ignition switch has three positions.
XR006A
OFF position — All electrical circuits
except the accessory plug are off. The
engine will not start. The key can be
removed in this position.

NOTE: The accessory plug is pow-
ered by the battery at all times.
XR016A
ON position — The ignition circuit is
complete and the engine can run. The key
cannot be removed in this position.
LIGHTS position — The ignition circuit is
complete and headlights and taillight are on.
The key cannot be removed in this position.
Leaving the ignition switch in the ON
or LIGHTS position for a long period
of time when the engine is not run-
ning may cause the battery to dis-
charge. Always leave the ignition
switch in the OFF position when
engine is not running.
CAUTION
ATV-0055
ATV-0056
47