Section 4 - Configuration
If you selected RAID 0, 1, 5, or 10, this screen will appear to allow you to
adjust the size of the RAID Volume.
Use the slider to change the RAID size or enter an amount in the field
provided. Check "Configure the remaining disk space as JBOD" if you wish
to use the remaining space for another RAID configuration.
Click Next to continue.
If you selected RAID 0, 1, 5, or 10, this screen will appear to let you
configure your auto-rebuild settings.
Click Enable Auto-Rebuild to automatically rebuild a failed drive if it has
been replaced with a new one.
Select Disable Auto-Rebuild if you want to start the rebuild process
manually after replacing a failed drive.
Click Next to continue.
D-Link ShareCenter DNS-340L User Manual
83