D-Link ShareCenter DNS-340L User Manual page 109

Section 4 - Configuration
Select a specific target in the Targets field to designate it. The entry will
change to red. This will be the chosen target you use to connect to.
Enter a name you want the virtual volume to be called in the Share Folder
vvol field. This is the virtual volume you will use to connect to the target.
Remember, no space between words is allowed.
Setup Authentication if you wish. If you have already setup CHAP on the
specified target, you will need to authenticate the target with the same
password you used with CHAP.
If you click No, the User Name and Password will be greyed out. If you click
Yes, the fields will open and you can enter the information per your CHAP
settings.
Click Save to save the settings or click Exit to cancel the settings.
The virtual volume appears in the table.
D-Link ShareCenter DNS-340L User Manual 107