Removal Of Top Cover Fpc / Wires / Sb-Pcb - Nikon D200 Repair Manual

Removal of Top cover FPC / Wires / SB-PCB

・ Unsolder the three metering mode FPC lead wires.
・ Unsolder the accessory shoe contact at four locations.
Metering mode FPC lead wire
Red×1, Brown×1, Black×1
Red, Brown, Black
△(Revice）
・ Unsolder the seven lead wires of the SB-PCB.
・ Take out the screw (#1601).
・ Remove the FPC of SB-PCB (#B1013).
・ Take out the screw (#1511).
・ Take out the screw (#1535).
・ Take out the screw (#1541).
#1601
#1511
FPC
#1541
Change page △× 2
Accessory shoe contact×4
#1535
#B1013
- Ｄ13 ･
△(Addition）
・It demounts tapes.
SB(Orange)
SB(Gray)
SB(Black)
SB (Green)
SB(Red)
Sync terminal(Green)
SB(White)
-
INC
VBA13001-R.3677.A
サービス
計画課
Ｍ
JUL.7.2006