Rear Body; Dc/Dc-Pcb Shield Plate; Main Condenser/Di-Pcb; I/F-Board Unit - Nikon D200 Repair Manual

2. Rear body

DC/DC-PCB shield plate

・ Take out two screws (#1537) and the screw (#1539).
・ Remove the DC/DC-PCB shield plate (#687).

Main condenser/DI-PCB

・ Take out the screw (#1564), and remove the DI-
PCB (#1029).
・ Remove the condenser (#1067).

I/F-board unit

・ Take out two screws (#1543).
・ Remove the I/F-board unit (#B1019).
#687
#1564
- Ｄ32 ･ -
INC
VBA13001-R.3677.A
#1537×2
#1539
#1067
#1029
#B1019
#1543×2