INC
VBA13001-R.3677.A
Disassembly of Top cover unit
SB upper case
・ Push the pop-up lever A-part of the top cover unit, and lift the built-in SB.
・ Take out two screws (#1623). (Fig.1)
・ Fold down #301 of the SB lower case on the top cover. Then while holding the hooks of the SB upper case
from both sides by hand, release them from the two holes by sliding/tilting, then remove #301. (Fig.2)
#1623×2
Pop-up lever A-part
Fig.1
Push
SB lower case unit
SB upper case
Hooks
#301
Fig.2
Holes
SB lock cover
#917C
#310
#309
#312
・ Remove the spring (#310).
・ #309 comes off.
#1565
- D12 ・
-