Nikon D200 Repair Manual page 66

AF motor wire arrangement
・ Arrange the AF motor wires by placing them properly among bosses at four locations.
・ Put the power drive-PCB (#1002) into the rear body groove, and fi x it with two screws (#1541).
・ Solder six wires.
・ Fix the conductive plate (#688, #689, and #690) with three screws (#1539).
・ Fix the conductive plate (#691) with the screw (#1543).
Put #1002 in the groove.
Conductive plate
(#689)
Conductive plate
(#690)
Change page △ ×3
#1539
#1539
#1539
#1539
- Ａ26 ･
#1541
#1541
Power drive PCB (#1002)
#1543
#1539
Conductive plate (#688)
△(Revise）
-
INC
VBA13001-R.3677.A
Brown: Main PCB
Yellow: Main PCB
Black: Charge motor
Red: Charge motor
Blue: AF motor
Orange: AF motor
△(Addtion）
#1035
△(Addtion）
#1002
Conductive plate (#691)
サービス
計画課
Ｍ
JUL.7.2006