Both-sided adhesive tape (to collect dust around aperture)
・Attach 4 pieces of #244 on the body.
※ Attach the tape from the inside
without any slackness, then fold it down
to conform to the shape of the corner.
#244
Attach the tape
without any gap
at the corner.
Battery contact spring
・Assemble #B824 into the body by fitting in
the boss of the body.
・Tighten the screw (#1540).
・Assemble #B822 into the body.
・Tighten the screw (#1567).
・Assemble #B823 into the body.
・Tighten the screw (#1567).
・Arrange the wires (red and black) in the
groove.
#1567
#1540
#B824
#1567
- A2 ・
-
INC
VBA13001-R.3677.A
#244×4
Arrange the wires in
the groove
#B823
#B822