Main PCB unit
・ Unsolder thirteen wires.
・ Remove five FPCs from the connector.
・ Take out three screws (#1616) and remove the main PCB unit (#B1001).
・ Unsolder the two wires of the back of the main PCB unit (#1001).
・ Remove the main connection FPC (#1035) from the connector of the back of the main PCB unit (#1001).
Purple: Battery contact
Back of Main PCB (#1001)
- D19 ・
Black: Charge
SW
Brown: Charge
Red: Charge
SW
Blue:FG-ID
Yellow: Power drive PCB
-
INC
VBA13001-R.3677.A
SW