Default Port VLAN
In the Default Port VLAN page, you can specify the default port VLAN ID
(PVID) for each port on your switch. All untagged packets entering the
switch are tagged by default with the ID specified by the port's PVID.
This page is set up in a table format. For each port listed in the Port column,
you can type a PVID in the PVID column.
Default Port CoS
Port Priority allows the user to specify which ports have greater precedence
in situations where traffic may be buffered in the switch due to congestion.
The ports with a setting of "high" will transmit their packets before those
with a "normal" setting. The settings on this page only affect ingress packets
that are not already tagged for priority. To raise the priority of a given port,
switch the port's setting from "normal" to "high." The default and normal
setting for a port is "normal."
In the Default Port CoS page, you can specify the priority for each port on
your switch.
56
Web I n t e r f a c e