52
Web I n t e r f a c e
–
Forward Delay — Sets the amount of time the system spends in
learning and listening states.
–
Bridge Priority — Sets the priority setting among other switches
in the spanning tree.
•
Disable — Disables the spanning tree protocol on the system.
To save any changes you make in this page for the current session, click
Apply. To reset these fields to their current value, click Reload.
Port Settings
In the Port Settings page, you can specify spanning tree parameters for each
port. This page is in a table format. For each port number listed under the
Port column, the following fields are available:
•
Priority — Assigned to this port for the Spanning Tree Protocol (0 -
255). A port with a higher priority is less likely to be blocked if the
Spanning Tree Protocol is detecting network loops. Low numeric value
indicates a high priority.