Window And Strut Installation - E-FLITE Taylorcraft 450 ARF Assembly Manual

Window and Strut Installation

Required Parts
Fuselage
Wing strut (2)
Side window (R&L)
Molded seats (2)
Required Tools and Adhesives
Canopy glue
Hobby scissors
1. Use hobby scissors to trim the side windows. Lines

have been molded into the windows to use as a guide for
trimming the windows.
34
Wing
2mm x 8mm sheet metal screw (6)
Windshield
#1 Phillips screwdriver
Low-tack masking tape
2. Use canopy glue to glue the window in from the inside

of the fuselage. Use low-tack masking tape to hold the
windows in position until the glue fully cures.
3. Use canopy glue to glue the windshield to the

fuselage. Use low-tack masking tape to hold the
windshield in position until the glue fully cures.
E-flite Taylorcraft ARF Assembly Manual