E-FLITE Taylorcraft 450 ARF Assembly Manual page 22

8. Stand back from the aircraft about 6–8 feet (2–3

meters) and check that the wing and stabilizer are
parallel. If not, lightly sand the fuselage where the
stabilizer rests to correct any alignment issues.
22
Align Parallel
9. Apply 30-minute epoxy to the exposed wood of the

stabilizer and to the fuselage where the stabilizer will
rest. Place the tail assembly on the fuselage and double-
check all alignments made. Allow the epoxy to fully cure
before moving your airframe.
E-flite Taylorcraft ARF Assembly Manual